Teltonika Router Management Service (RMS)
RMS - Applying Credits to a Device
Applying Credits to a Device RMS Platform Applies to: Any device managed in RMS. What this is An RMS credit is a paid-for allowance, purchased from Jola, that enables one device to be fully managed within RMS. Each device that requires full ...
RMS - Alerts & Automations
Getting Notified When Something Happens RMS Alerts & Automations Applies to: Any device managed in RMS. What this is This feature allows you to automate specific actions based on trigger conditions, removing the need to log into RMS manually to check ...
RMS - Device Import Template
Please download the attached excel spreadsheet and fill out the following information Device MAC address: Device Serial Number: Name: (A unique identifier of the device) Password: The Admin password of the device Once you have filled out these ...
RMS - Smart Roaming Automation
Using RMS Automation resellers are able to setup rules that will act similar to Smart Roaming which allow devices to reset the onboard modem once a specific low signal threshold has been met. Firstly you will need to create a task within RMS. 1) ...
RMS - Custom Config deployment
RMS has the ability to allow you to create custom configurations from the platform and deploy them directly to devices. To begin to setup a devices configuration find the device in the management page and hit the cog. Once Selected there will be a ...
RMS - Access Devices Remotely
Accessing a device from RMS is very straightforward, simply find the device that you wish to access and select the DeviceWebUI Link If the devices is reachable you will see a tick and be able to either connect directly or generate a shareable URL ...
RMS - Adding Tags
Tags are a versatile tool within RMS which allows you to not only setup unique modifiers for referencing devices, they will also allow to deploy automation through the tags. To Create a Tag within RMS you will need to select Administration > Tags > ...
RMS - Adding Devices
To add a device into RMS you will simply need to go into Management > Devices. Select Actions > Add Device You will then be greeted with the following page which will ask you which device you are wanting to import, you will require the following ...