RMS - Adding Tags

Tags are a versatile tool within RMS which allows you to not only setup unique modifiers for referencing devices, they will also allow to deploy automation through the tags.

To Create a Tag within RMS you will need to select Administration > Tags > Actions > Create Tag

From there you can name a tag and give it a description and colour.

There is also actions you can perform once a tag has been assigned to a device. 

These actions are;

Upload Firmware File.

Upload Backup File.

Execute Task Manager Group.

Apply Device Configuration.

These actions will be automatically applied once the add a tag onto a device.

To add a tag to a device simply hit the tags option on the devices page and select.

• Related Articles

• RMS - Alerts & Automations

  Getting Notified When Something Happens RMS Alerts & Automations Applies to: Any device managed in RMS. What this is This feature allows you to automate specific actions based on trigger conditions, removing the need to log into RMS manually to check ...

• RMS - Custom Config deployment

  RMS has the ability to allow you to create custom configurations from the platform and deploy them directly to devices. To begin to setup a devices configuration find the device in the management page and hit the cog. Once Selected there will be a ...

• RMS - Adding Devices

  To add a device into RMS you will simply need to go into Management > Devices. Select Actions > Add Device You will then be greeted with the following page which will ask you which device you are wanting to import, you will require the following ...

• RMS - Access Devices Remotely

  Accessing a device from RMS is very straightforward, simply find the device that you wish to access and select the DeviceWebUI Link If the devices is reachable you will see a tick and be able to either connect directly or generate a shareable URL ...

• Adding Bolt-on's

  Please download the attached PDF file for a step by step guide on adding Bolt On's