Adding Devices - RMS Platform
To add a device into RMS you will simply
need to go into Management > Devices.
Select Actions > Add Device
You will then be greeted with the following page which will ask you which device you are wanting to import, you will require the following pre-requisites;
Device
Name
Serial Number
MAC Address
Device Password
Then hit submit the device will be added into your platform as long as the device is online it should register within a few hours.
You can also import in bulk from selecting from file, there is a downloadable template from this page
Related Articles
Adding Tags - RMS Platform
Tags are a versatile tool within RMS which allows you to not only setup unique modifiers for referencing devices, they will also allow to deploy automation through the tags. To Create a Tag within RMS you will need to select Administration > Tags > ...
Custom Config deployment - RMS Platform
RMS has the ability to allow you to create custom configurations from the platform and deploy them directly to devices. To begin to setup a devices configuration find the device in the management page and hit the cog. Once Selected there will be a ...
Access Devices Remotely - RMS Platform
Accessing a device from RMS is very straightforward, simply find the device that you wish to access and select the DeviceWebUI Link If the devices is reachable you will see a tick and be able to either connect directly or generate a shareable URL ...
Smart Roaming Automation - RMS Platform
Using RMS Automation resellers are able to setup rules that will act similar to Smart Roaming which allow devices to reset the onboard modem once a specific low signal threshold has been met. Firstly you will need to create a task within RMS. 1) ...
JolaPhone - Compatible Devices List
Below is the full list of devices and accessories compatible with the JolaPhone platform Please note, the devices we do not supply are treated as a BYOD (bring your own device) and are supported on a best effort basis by the Jola Support team. This ...