Yealink W52P - Factory Default Process

Yealink W52P - Factory Default Process

The following process can be followed to factory default a Yealink W52P handset, please note this is the manual process due to the Web Interface being locked out once the device has provisioned.


  1. Power off the unit - if powered by PoE this might mean unplugging the network cable
  2. Wait 15 seconds
  3. Press and hold the connect button on the base station
  4. Reconnect the power
  5. Wait until all 3 status lights are on, showing solid green
  6. Release the button and wait 5 minutes
  7. Power off the unit
  8. Wait 15 seconds
  9. Reconnect the power
  10. Your phone may update it's configuration after the reboot which may result in a second reboot process automatically within a minute or two of the first reboot


    • Related Articles

    • Yealink Provisioning Guide

      See the attached file for a step by step guide on how to provision a Yealink Device
    • Jola Mobile Fault Process

      In order for us to effectively support you with your mobile query, please can you carry out the following checks;   1) Has the device been powered down for 5 minutes? - This is essentially forces to the SIM to reconnect.   2) Has the SIM been tested ...
    • How to Factory Reset Robustel Routers

      The following steps work for all Robustel routers 1. Power down the device 2. Hold the Reset PIN 3. Whilst still holding the Reset Pin, turn the device power back on 4. Within 15 seconds, the lights on the front of the router will flash indicating ...
    • Multiple Yealink Handsets on one Base Station

      Download the attached guide for step by step instructions on how to associate multiple Yealink handsets to one base station (Maximum 3 handsets) This is useful for offices with limited ports on their network.
    • Flexible Seating – Sign in/out process

      Flexible seating is a Hotdesking feature To login to a handset  On the Host Device, select Guest IN, this will be located at the bottom of the handsets screen  In the User ID Field enter your Extension Number and in the Password field input ...