Technicolor 588 - disable SIP ALG
All preconfigured JolaNet Technicolor routers are shipped with SIP ALG disabled.
If the router is reset or adjusted, SIP ALG may become enabled.
Attached is a guide on how to disable SIP ALG
SIP Manager Teams Purchase and Config v3
Guide to using SIP Manager and the Microsoft 365 Admin Centre to Order and Configure Teams ‘Direct Routing’ There are 8 stages in the Teams Purchase wizard on SIP Manager: 1. Provisioning Pre-Requisites 2. Tenant Details 3. Tenant Details ...
Authentication We currently only support one method of authentication: IP Address authentication Outbound calls are authenticated by the originating IP only. This should only be used where your SIP server, PBX or soft switch has a static IP ...
Jola SIP Trunk - Asterisk
Chan_SIP Configuration There are two different ways you can connect, IP Auth SIP trunk and Username/Password Registration Trunk. IP Auth Configuration Add the following lines to sip.conf, change the values as required. host=<SIP Gateway IP> ...
Jola SIP Trunk - 3CX
Create your SIP Trunk on 3CX first. In the 3CX Management Console menu, select “SIP Trunks” > “Add SIP Trunk.” Select the Country that the VoIP provider operates in. Select the “Generic” option in Country drop-down menu and then choose between ...
SIP Call Status Codes
The SIP Trunking Platform and SIP Inbound Platform provide a lot of information about the state of calls, both successful and failed. Below is a simple guide to understanding what the status and response codes mean, both to you, and the end-user. ...