SIP Manager - Number Diverts

SIP Manager - Number Diverts

The first step when setting up a call forward on SIP Manager is to create a divert rule

Select Call Forwards and then select Create



Give the rule a name and enter the number you wish to forward to

Next in the left column, select Numbers and then Manage

Select Details on the number you wish to divert (Please note, if the number does not appear in this window the divert would need to be diverted by the supplier)



Select Routing Voice

Select Routing Voice, Select Call Forwards from the first drop-down list and then select your rule in the second drop-down list. To save the divert, hit select.


To remove the divert, follow the above steps from the Numbers tab and revert the routing to the desired destination.


    • Related Articles

    • SIP Manager Teams Purchase and Config v3

      Guide to using SIP Manager and the Microsoft 365 Admin Centre to Order and Configure Teams ‘Direct Routing’ There are 8 stages in the Teams Purchase wizard on SIP Manager: 1. Provisioning Pre-Requisites 2. Tenant Details 3. Tenant Details ...
    • SIP Manager - Number Diverts

      The first step when setting up a call forward on SIP Manager is to create a divert rule Select Call Forwards and then select Create Give the rule a name and enter the number you wish to forward to Next in the left column, select Numbers and then ...
    • Guide to Jola SIP Manager SMS 2FA

      Guide to Jola SIP Manager SMS Two-Factor Authentication Jola SMS Two-Factor Authentication is a feature on the SIP Manager portal that adds additional layer of security beyond just a password, making it harder for unauthorised users to gain access to ...
    • SIP Manager Training video

      Our SIP Manager Training video can be accessed and downloaded from the following ShareDrive - SIP Manager Training Video
    • SIP Standards

      Authentication We currently only support one method of authentication: ​ IP Address authentication Outbound calls are authenticated by the originating IP only. This should only be used where your SIP server, PBX or soft switch has a static IP ...