First Time Connection - Robustel R1520

First Time Connection - Robustel R1520

First time connection

Until the router connects to the internet, your router will have a 'factory shipped' configuration.
When an activated SIM is inserted into the router (or the SIM already inserted is activated) the router will auto-detect the SIM provider and connect to the internet.

******** Please wait up to 15 minutes *******

Within 15 minutes, the router will be auto-configured:

1. The appropriate APN details will be added automatically

2. Remote access via HTTP / HTTPS will be disabled (this can be manually reversed later if required).

3. Admin Access to the router will be set to:

Username = admin
Password = RB followed by the last 6 digits of the device MAC address - (e.g. RB4DB1A2 where the MAC address ends 4D:B1:A2)
NB - MAC address information is located on the sticker on the router

4. WiFi will be enabled. The SSID varies based on the model of Robustel you have:


SSID - R1520-WiFi
Password = w1rele55
 

Access without an active SIM

Access to the router is via Ethernet cable only as WiFi is disabled until connected to the internet

Admin access:

Username = admin

Password = admin


NB. Any custom configuration applied to a router before it has connected to the internet and successfully auto-configured will be overwritten by the auto-configuration process. Users requiring customised configuration are advised to allow the router to auto-configure before applying custom settings.


    • Related Articles

    • First Time Connection - Robustel R1510

      First time connection Until the router connects to the internet, your router will have a 'factory shipped' configuration. When an activated SIM is inserted into the router (or the SIM already inserted is activated) the router will auto-detect the SIM ...
    • First Time Connection - Robustel R2000

      First time connection Until the router connects to the internet, your router will have a 'factory shipped' configuration. When an activated SIM is inserted into the router (or the SIM already inserted is activated) the router will auto-detect the SIM ...
    • First Time Connection - Robustel R2110

      First time connection Until the router connects to the internet, your router will have a 'factory shipped' configuration. When an activated SIM is inserted into the router (or the SIM already inserted is activated) the router will auto-detect the SIM ...
    • How to Factory Reset Robustel Routers

      The following steps work for all Robustel routers 1. Power down the device 2. Hold the Reset PIN 3. Whilst still holding the Reset Pin, turn the device power back on 4. Within 15 seconds, the lights on the front of the router will flash indicating ...
    • Introduction to the Robustel Cloud Manager Service (RCMS) v1.3

      Jola have no involvement in, or responsibility for, the content, the accuracy of the content or links on RCMS.  Furthermore, Jola do not have detailed knowledge or expertise when it comes to working with the RCMS platform.  As such, Jola Resellers ...