***Draytek security advisory - June 2018***
Please be aware the router vendor Draytek has announced a security advisory for the Draytek 2860 and 2862 router models
***IT IS STRONGLY ADVISED THAT YOU UPGRADE THE FIRMWARE IMMEDIATELY***
See attached for more information on how to upgrade you firmware.
Please note - we strongly recommend you A) verify the model of your router ; B) take a back up of your existing configuration.
Jola do not hold a copy of your router configuration and will not be responsible for any upgrades performed.
This information is recommended by a third party manufacturer and any Draytek CPE purchased from Jola is sold on a one-off, configuration and ship basis.
Draytek VDSL2+ WAN Guide
The DrayTek Vigor 2860/2862 series router is an Openreach MCT compliant VDSL2 / ADSL2+ router. This setup guide demonstrates how to configure a DrayTek Vigor router's WAN1 (VDSL2) interface to connect to a JOLA Fiber Broadband VDSL2 line, connecting ...
Draytek - Firmware Update - 2862
Please follow the firmware link below for the latest firmware. You will be redirected to Drayteks website. Information regarding which 2862 models are supported can be found at the below:- https://www.draytek.co.uk/support/downloads/vigor-2862 Please ...
Draytek - Firmware Update - 2860
Please follow the firmware link below for the latest firmware. You will be redirected to Drayteks website. Information regarding which 2860 models are supported can be found at the below:- https://www.draytek.co.uk/support/downloads/vigor-2860 Please ...
Draytek - Configuring the Wireless Network
Download the attached guide for step by step instructions on how to configure the Wireless network for Draytek routers.
Bridge Mode IP Passthrough configuration guide - Robustel (All Models)
All models in the Robustel range support Bridge Mode (IP PassThrough) to allow customers to use a third party router to manage the LAN while the Robustel acts as a modem only. Please Note, this requires a Fixed IP SIM To enable Bridge Mode ...