Robustel - Change the WiFi Settings

PLEASE NOTE – All Jola supplied Robustel routers come with the Jola ‘Mobile Manager client’ app pre-installed.  When the router is first powered on the app will auto-update the factory WiFi settings to enable WiFi and set the SSID and Password as below (only include the relevant SSID). You therefore may not need to update the WiFi settings manually but if you do, please see the instructions below

SSID
R1510-WiFi
R2000-WiFi
R2110-WiFi-2ghz
R2110-WiFi-5ghz
R5020-WiFi-2ghz
R5020-WiFi-5ghz

Access Password = w1rele55

How to change the WiFi Settings

When first logged in to the router, the below screen will appear. All custom configuration options can be found on the menu options of the left of this screen.

  

Click Interface - WiFi and view the Access Point tab

Enter your desired details

 

 

 Tip! When a change is submitted, settings will not be applied until Save & Apply is selected.

 

• Related Articles

• Robustel - Change Router Admin Details

  When first logged in to the router, the below screen will appear. All custom configuration options can be found on the menu options of the left of this screen. It is recommended you change the Admin password to prevent unauthorised access. Click ...

• Robustel - Factory Reset Process

  The following steps work for all Robustel routers 1. Power down the device 2. Hold the Reset PIN 3. Whilst still holding the Reset Pin, turn the device power back on 4. Within 30 seconds, the lights on the front of the router will flash once in ...

• Robustel - Health Check Application

  Not all Robustel routers include the Jola Health Check app. You can check if a router has this app installed by navigating to the ‘App Centre’ in the ‘System’ section of the GUI. The App Centre shows what apps are installed on a Robustel and whether ...

• Robustel - First time connection guide

  First time connection Until the router connects to the internet, your router will have a 'factory shipped' configuration. When an activated SIM is inserted into the router (or the SIM already inserted is activated) the router will auto-detect the SIM ...

• Robustel - Bridge Mode/IP Passthrough Guide

  All models in the Robustel range support Bridge Mode (IP PassThrough) to allow customers to use a third party router to manage the LAN while the Robustel acts as a modem only. Please Note, this requires a Fixed IP SIM To enable Bridge Mode (IP ...