Recent Articles
Teltonika Routers - Changing the Router Admin Details
Changing the Router's Admin Login and Gateway IP Address What this is The gateway IP address is the local address used to reach the device's web interface, for example 192.168.1.1. The admin username and password are the login details used once that ...
Teltonika Routers - Bootstrap Profile
Understanding the "Bootstrap eSIM Profile Detected" Message eSIM-Capable Teltonika Devices Applies to: Any Teltonika device with eSIM capability, whether or not an eSIM is currently in use What this is Every eSIM-capable device leaves the factory ...
Teltonika Routers - Performing a Factory Reset
Performing a Factory Reset RUTX50 / RUT200 / RUT901 / OTD500 Applies to: All four models (steps confirmed on RUT200; menu wording may vary slightly by model or firmware) What this is A factory reset clears some or all of a device's configuration and ...
Teltonika Routers - Installing an eSIM
Installing an eSIM eSIM-Capable Teltonika Devices Applies to: Teltonika devices with a physical eSIM built in. eSIM is only present on specific hardware variants of a model, not on every unit, so this should be checked on the specific device before ...
Teltonika Routers - SMS Commands
Sending Commands to the Router by SMS SMS Utilities for RUTX50 / RUT200 / RUT901 / OTD500 Applies to: RUTX50, RUT200, RUT901, OTD500 (confirmed: Jola's firmware keeps the standard SMS Utilities feature and commands enabled) What this is This is the ...